Night Rider

By Andrew Michael · Puch Magnum · 1978

Added · Updated

1 / 7
k10 forks with disc brake. Temp guage mounted inside the Puch speedo housing and a GPS mount through the Mag Dash. Full rebuild in my blog: http://www.stuckinthebuckosphere.com/2012/03/double-moped-build-with-hi-res-photos.html

Parts

engine

carburetion

  • Dellorto 19mm PHBG

exhaust

electrical

  • Puch Stock Ignition

Tuning

Main 90 · Idle 48 · Starter 55

Comments (2)

Andrew Michael — 13 years, 5 months ago

Yea. Gotta take very good care to drain all fluid and weld as cool as possible and cool off every couple seconds with water. If it gets too hot it will bubble the metal inside the tube and ruin the forks.

Peter Notarangelo — 13 years, 6 months ago

welded mount to the k10 disassembled?